Recently, I wanted to make my own DNS server for some websites I was creating on my home network. But after looking into it, I realized it would be a lot of work. Then I found Pi-Hole, which seemed like an easier solution.
Pi-Hole
Pi-hole is a handy tool that blocks ads on your whole network and can also work as a local DNS server. This means you can customize how your network finds websites, giving you more privacy and control over your internet. In this guide, we'll learn how to use Pi-hole to set up custom domain names on a Raspberry Pi.
Understanding Local DNS Entries
Local DNS entries let you give custom names to things on your home network, like servers or smart devices. This makes it easier to find them without needing to remember long numbers.
Setting Up Pi-hole for Local DNS Entries
Step 1: Get Your Raspberry Pi Ready: Make sure your Raspberry Pi is set up and connected to your network.
Step 2: Install Pi-hole: Use a terminal or another device to install Pi-hole on your Raspberry Pi by running a command.
Step 3: Configure Your Router: Change your router settings so that all devices on your network use Pi-hole for DNS.
Step 4: Access Pi-hole Web Interface: Once Pi-hole is installed, you can control it through a web page. Just enter your Raspberry Pi's IP address in a web browser.
Step 5: Navigate to Local DNS Settings: Go to the DNS settings in Pi-hole's web interface.
Step 6: Add Local DNS Entries: Click to add a new local DNS entry and give it a custom name and IP address.
Step 7: Save and Apply Changes: Save your changes in Pi-hole, and it will update its DNS records.
Step 8: Verify Local DNS Resolution: Test your new custom domain names to make sure they work on devices in your network.
Conclusion
Using Pi-hole for local DNS makes it easy to customize how your home network works. With just a Raspberry Pi, you can set up custom domain names for your devices, making them easier to find. Follow these steps to make the most of Pi-hole on your network.
0 comments:
Post a Comment